TDH201 Troubleshooting

Not Cutting:

• Check and clean blades, replace if dull
• Check for worn or broken lower blade spring
• Check lower blade adjustment

Not Feeding:

• Check yoke spring adjustment
• Check feed gear assembly for missing or flattened teeth
• Check for missing feed handle pawls
• Check blades for accumulated grease or tape resins and clean if needed
• Check set screw on feed wheel
• Check upper tape plate for binding

Jamming:

• Check main gear for missing or flattened teeth
• Check lower tape plate for bending
• Check for bent pressure plate shaft
• Check upper tape plate for binding
• Check for missing water brush