PC101SPRAY

• Has high resistance to chemical vapors, is completely waterproof and is unaffected by both salt and fresh water
• 12 oz (354.88 ml) aerosol can
• Provides permanent protection against corrosion, mildew, and electrolysis on all non-ferrous metals used in the electronics industry
• Durable enough to withstand continuous operating temperatures between -60ºF (-51ºC) and 280ºF (138ºC)
• Can be applied by brush, spray, dip, or curtain coating
• Solderability of parts is maintained with the use of PC101 ™
• Resistant to discoloration, even at high temperatures
• Can be thinned for spraying

Applications:

• Protects printed circuit boards
• Thick film circuits
• Electrical components
• Transformer coils
• Motor starters and field coils

Physical Properties:

• Specific gravity @75°F (24°C): 0.944 ± .0002
• Weight per gallon: 7.75 lb (3.52 kg)
• Percent solids: Liquid 36% / Spray 18%
• Viscosity @75°F (24°C): 49 secs w/#2 Zahn cup ± 5 secs
• Centipoise @75°F (24°C): 205 w/#3 cup @ 12 rpm
• Average thickness buildup: .002 inch (.05mm)
• Color: Clear
• Clarity: Transparent with a fluorescent tracer added
• Average coverage/gallon: 450 sq.ft. (41.8m2)
• Shelf life at @75°F (24°C): 1 year in air tight container
• Flammability when dry: Self-extinguishing. Passes military specs
• Fungus resistant: Passes MIL-I-46058C
• Main component: Modified acrylic
• Flash point (Cleveland open cup): 44°F (7°C)
• Toxicity: 75 ppm
• Flexibility: Passes MIL-I-46058C
• Hydrolytic stability: Passes MIL-I-46058C
• Drying time for handling:10 minutes @ 72°F (22°C), 50%RH
• Recommended curing conditions: 24 hr. @ room temp. @ 50% RH or 30 mins @ 170°F (77°C)
• Curing mechanism: Solvent evaporation
• Solderability: Excellent
• Heat resistance: No change when heated to 400°F (204°C) and allowed to return to room temperature. No ill effects. Color unchanged.
• Adhesion: Excellent. Meets federal standard 14/A method 6303
• Thermal shock test: Passes MIL-I-46058C
• Continuous use temperature range: -60 to 280°F (-51 to 138°C)
• Thinner: PC101 thinner

Electrical Properties:

• • Minimum insulation resistance: 1.5 x 10/12 ohms
  • Dielectric leakage rate:
  • Q (resonance) and dissipation factor: 66 @ 50mHz – uncoated board
  • Q change before and after coating: 3.37% at 50mHz
  • Moisture resistance: Average insulation resistance is a minimum of 1 x 10/10 ohms
  • PC101 ™ is an exclusive product of START International

 MSDS – For Material Safety Data Sheet for PC101 Click Here