TDA025 Troubleshooting Guide  

No Power:

• Make sure unit is plugged in
• Turn power switch on
• Check fuse (48)
• Make sure Safety Cover (14) is fully closed

Tape not sticking to carousel:

• Wipe down Carousel (1) with IPA
• Tighten screw on Lever (46) to increase length of tape placed on carousel
• Loosen screw on Arm Frame (42) to increase hold down pressure on tape

Won't cut:

• Clean blades (21/25) using IPA or equivalent
• Inspect blades for nicks and/or wear, replace as needed
• Using the two adjustment screws behind the upper blade, adjust blade inward by alternately tightening the two screws

Won't feed / Tape jam:

• Check upper and lower blade spacing to ensure the blades do not overlap and jam
• Clean Tape Bite (29) with IPA
• Clean Upper Blade (25) and Lower Blade (21) with IPA

Hand crank not working:

• Remove body (11)
• Remove Gear Cover (62)
• Check spring on Lever (68)